Title: VGA/SVGA Y-Cable Replacement For Cubes and Stations
Post by: dmad on October 13, 2010, 04:07:36 AM
Post by: dmad on October 13, 2010, 04:07:36 AM
Hi Everyone
I have for sale SVGA/VGA Y-Cables as a replacement for Mono Slabs and Cubes. I am making them to order so as to replace the rapidly aging mono monitors.
I made a few of these and decided to fork out on a job lot of DB19 connectors so as to build them in bulk.
These are £50 each including shipping to anywhere in the world. No reasonable offers refused and can discount if you buy more than one.
I myself have 2 Cubes which are using this same cable. I will ship anywhere in the world inclusive of the cost per cable. If you want more than one cable, PM me and I will do a better rate.
To clarify, this cable allows you to replace your NeXT mono monitor with a compatible LCD or CRT screen (must support NeXT refresh rates/resolution/sync on green). A lot of Eizo and Dell monitors support this. The cable has a DB19 on one end (to connect to a mono cube or station, with one DB19 going to a soundbox and a 15 pin DSUB connection to an SVGA monitor.
Interested? - let me know. I am in the UK and Paypal is preferred - but can accept credit cards.
cheers
I have for sale SVGA/VGA Y-Cables as a replacement for Mono Slabs and Cubes. I am making them to order so as to replace the rapidly aging mono monitors.
I made a few of these and decided to fork out on a job lot of DB19 connectors so as to build them in bulk.
These are £50 each including shipping to anywhere in the world. No reasonable offers refused and can discount if you buy more than one.
I myself have 2 Cubes which are using this same cable. I will ship anywhere in the world inclusive of the cost per cable. If you want more than one cable, PM me and I will do a better rate.
To clarify, this cable allows you to replace your NeXT mono monitor with a compatible LCD or CRT screen (must support NeXT refresh rates/resolution/sync on green). A lot of Eizo and Dell monitors support this. The cable has a DB19 on one end (to connect to a mono cube or station, with one DB19 going to a soundbox and a 15 pin DSUB connection to an SVGA monitor.
Interested? - let me know. I am in the UK and Paypal is preferred - but can accept credit cards.
cheers
Title: VGA/SVGA Y-Cable Replacement For Cubes and Stations
Post by: dmad on December 08, 2013, 10:35:41 AM
Post by: dmad on December 08, 2013, 10:35:41 AM
bump - I still have about 10-15 of these cables left if anyone wants to buy one...
Title: VGA/SVGA Y-Cable Replacement For Cubes and Stations
Post by: dmad on December 16, 2013, 02:41:47 PM
Post by: dmad on December 16, 2013, 02:41:47 PM
Title: soundbox
Post by: espressofranky on December 17, 2013, 10:09:12 AM
Post by: espressofranky on December 17, 2013, 10:09:12 AM
hi, do you have a soundbox as well?
Title: VGA/SVGA Y-Cable Replacement For Cubes and Stations
Post by: dmad on December 19, 2013, 02:21:58 PM
Post by: dmad on December 19, 2013, 02:21:58 PM
I've got 3 but you may have to prize them out of my cold dead hands!!!
Title: ok no problem
Post by: espressofranky on December 19, 2013, 02:24:26 PM
Post by: espressofranky on December 19, 2013, 02:24:26 PM
sorry, never mind. I wish nice holidays. Best Frank
Title: VGA/SVGA Y-Cable Replacement For Cubes and Stations
Post by: RimmerDK on February 04, 2014, 06:23:12 AM
Post by: RimmerDK on February 04, 2014, 06:23:12 AM
Any more cables?
Title: VGA/SVGA Y-Cable Replacement For Cubes and Stations
Post by: helf on February 10, 2014, 02:34:49 AM
Post by: helf on February 10, 2014, 02:34:49 AM
I'd actually like one of these as well.
Title: VGA/SVGA Y-Cable Replacement For Cubes and Stations
Post by: mrbill on May 03, 2014, 02:58:24 AM
Post by: mrbill on May 03, 2014, 02:58:24 AM
Sent you a PM, hope you still have a cable left!
Title: VGA/SVGA Y-Cable Replacement For Cubes and Stations
Post by: it68000 on May 03, 2014, 07:14:42 AM
Post by: it68000 on May 03, 2014, 07:14:42 AM
me too interested, please let us know how many cable are left. :-)
Title: VGA/SVGA Y-Cable Replacement For Cubes and Stations
Post by: gtnicol on May 03, 2014, 04:59:21 PM
Post by: gtnicol on May 03, 2014, 04:59:21 PM
You can have these made... I ordered some a while ago and they ended up costing about $50 each... might be a bit more expensive now.
Title: VGA/SVGA Y-Cable Replacement For Cubes and Stations
Post by: Rob Blessin Black Hole on May 05, 2014, 10:53:01 PM
Post by: Rob Blessin Black Hole on May 05, 2014, 10:53:01 PM
Hello NeXT community: I have 10 of these cables in stock for $65 and $10 shipping
They work with mono slabs and cubes with model 983 power supplies.
Best regards Rob
They work with mono slabs and cubes with model 983 power supplies.
Best regards Rob
Title: VGA/SVGA Y-Cable Replacement For Cubes and Stations
Post by: mrbill on May 06, 2014, 09:05:50 AM
Post by: mrbill on May 06, 2014, 09:05:50 AM
Thanks Rob, sent you a PM. I'll take one.
Title: Thanks, Rob!
Post by: mrbill on May 27, 2014, 12:41:27 PM
Post by: mrbill on May 27, 2014, 12:41:27 PM
Big thanks to Rob @ BlackHole for the cable; I finally got all the parts in and everything worked right the first time! Monitor is a NEC Multisync 1855NX that I picked up off eBay for around $50. I centered the display a while after I took the picture. I had the mousepad custom made by ArtsCow - $21 for three of them.
Title: VGA/SVGA Y-Cable Replacement For Cubes and Stations
Post by: Rob Blessin Black Hole on June 03, 2014, 04:50:04 PM
Post by: Rob Blessin Black Hole on June 03, 2014, 04:50:04 PM
Cool Mouse pad! I'm suprised the image does not auto adjust and fill out the screen. Best regards Rob Blessin