I would like to know, how can I identify which device is assigned to a SCSI tape drive
on boot, I can see the scsi device identified as:
ARCHIVE Python 28454-XXX Rev as st0 at sc0 target 4 lun 0
and I'm not sure which type of device will be assigned to the tape
I had tested nps0, np0, nrst0, nrst(x), and few others
Hello : I found this
http://chiclassiccomp.org/docs/content/computing/Maynard/91-9-20000000E_PythonDAT_QIG.pdf and it sound like it is set to SCSI id 4 , it shows how to set the jumpers , make sure it is the only SCSI device set to SCSI ID 4 :) , you can also set to 5 or 6.
Best regards Rob Blessin