Hi,
I'd like to reinstall OpenStep on my Turbo Cube.
However, when I try to boot from ROM monitor on any scsi device (SCSI2SD, CDROM) with b, bsd, bsd(1,0,0) or bsd(6,0,0) the system will lockup completely. Neither the PowerButton nor the NMI react. The only help is to remove the power.
When I do not enter the ROM monitor the system boots normally without any issues.
The system is:
Turbo Cube Motherboard with 128MB RAM
Dimension with 48MB RAM
SCSI2SD v.5 configured with 3x 2GB disks
SCSI-CDROM