Hello
I got a CubeTurbo, with a small HD, and I found a 80pin SCSI HD 4.5GB, and I bought a convertor to 50pin SCSI, but I do not know if I need an internal SCSI terminator
any help, please?
Quote from: "NeXTnewbe"Hello
I got a CubeTurbo, with a small HD, and I found a 80pin SCSI HD 4.5GB, and I bought a convertor to 50pin SCSI, but I do not know if I need an internal SCSI terminator
any help, please?
Shure you have to set an internal terminator. Best way to try to get a real 50 pin drive since the 80to50 converters mostly doesn't have a terminator build in.
Thanks Andreas,
now I got a "new" 9GB HD SCSI 50 pin, IBM DNES-309170, internal terminated and I would like to know if there is any known issue with this HD
Thanks for the Help
Quote from: "NeXTnewbe"Thanks Andreas,
now I got a "new" 9GB HD SCSI 50 pin, IBM DNES-309170, internal terminated and I would like to know if there is any known issue with this HD
Thanks for the Help
That drive is fine but you have to format it with an proper disktab (and the disk command) and install it via the dump/restore thingy. builddisk doesn't work proper on this drive.
Quote[/
That drive is fine but you have to format it with an proper disktab (and the disk command) and install it via the dump/restore thingy. builddisk doesn't work proper on this drive.
oh!, Thanks, yesterday night after work, went to my home, and installed the HD, and I setup to ID 3, then when I startup the Cube, it was recognise and the Disk builder, made a copy of the OS, then I disconnect the old one, setup SCSI to ID 1, boot the Cube, and it works!, the unique thing that I notice was the maximun File system was 1.5GB, then I created 4 more using newfs command.
I was wondering if NS3.3 can support make a biger file systems, due that in my HD is a remaining space unallocated (aprox 1.1GB) and I do not know how to create a bigger FS (4GB or so)
any help, will be wellcome.
Thanks